How To Measure And Cut Stair Stringers

HAUS PLANS ®️1:002024DIY & Crafts

We just finished framing this warehouse, and now I need to build a set of stairs up to the storage space above the office. The distance from the floor to the top of the platform is 107 3/8”. For commercial stairs the SEVEN ELEVEN rule applies- no more than a 7” rise and no less than an 11” run. 107 3/8” divided by 16 risers gives me a riser height of 6 11/16”. Here I set the inside of my square at 6 11/16” and 11” to mark out the rise and run. I like to use these stair guides- once they’re tightened down- they hold the square in place, so I don’t have to check the measurements each time. After I cut the first stringer, I use it as a pattern to trace the others- this way they’re exactly the same. I subtract one inch off the bottom of first riser, so when I install the one-inch-thick tread I’ll still have a 6 11/16” from the floor to the top of the tread. Next, I use my circular saw to cut everything out- I’m careful not to overcut so I don’t weaken the stringer. It’s fun to knock these

Landed here from a link? Roll your own.

🎲 Roll the Dice

Played through the official embedded player. Watch on YouTube.