How to Build an Entertaining Cart Part 4: Wheels, Tile & Finish
Lowe's Home Improvement2:552011DIY & Crafts
In the last part of the video series from Lowe's Shop Class, learn how to add the wheels and tile to the cart and learn how to finish your entertaining cart. Find project details here: http://low.es/1Nj5MSC First, sand everything, wipe it down with a tack cloth and apply a coat. Use an exterior varnish because the cart is made for outdoor entertaining. When the first coat is dry, apply a second. When that coat is dry, sand everything lightly, wipe it down, and apply the final coat. For the castors, take a T nut and drive it into the holes you previously drilled. Then thread the castors into the T nuts and tighten them down. The front wheel setup consists of an axle, a washer, a wheel and a cap nut on each end. Start with a steel rod, and attach a cap nut but using a socket and a hammer. Add a wheel and a washer and feed it through the holes in the front legs. Then add another washer and another wheel. Then make a mark on the rod 1/2 inch away from the wheel. Remove the steel rod and
Landed here from a link? Roll your own.
🎲 Roll the DicePlayed through the official embedded player. Watch on YouTube.