How to Build a DIY Dining Table & Benches
Lowe's Home Improvement3:182011DIY & Crafts
Learn how to build a beautiful dining set with these step by step instructions. Find project details here: http://low.es/1N3xio0 Assemble your table base upside down on a flat surface. After cutting your aprons and legs to size and drilling pocket holes, attach a long and short apron to one leg. The outside face of the leg and the outside face of the aprons should be offset by about 1/4 inch. Use glue and pocket hole screws to secure the parts. Add a second leg to the short apron, followed by the remaining long apron. When those have been secured, add the remaining legs and short apron. Flip the table upright and cut 4 corner braces that will reinforce the leg joint. Glue the braces in each corner and secure with screws. Drill pilot holes and drive screws and washers into each leg. Cut the stretchers to length, drill pocket holes, and install between the long aprons by attaching with pocket screws. Cut the top slats to size, sand, and apply stain and clear finish. Place the two scr
Landed here from a link? Roll your own.
🎲 Roll the DicePlayed through the official embedded player. Watch on YouTube.