Step-By-Step Installing Casing On An Interior Door

HAUS PLANS ®️1:002023Bricolage

I just finished hanging this door at the warehouse. Now let’s install the casing. I start by making marks on the upper left and right side of the jamb a ¼” out for the reveal. Then I measure and cut the first leg at a 45-degree angle. I like to install the piece that goes against the hinges first. I use my 18-gauge brad nailer to shoot 1¼” brads through the casing into the door jamb. Then I switch to my 15-gauge trim gun to nail the casing to the wall. The ¼” reveal keeps the casing away from the hinges. Next, I cut a 45 on the left side of my header piece. Instead of measuring the length of the header piece- I just make a mark on the right side where the reveal is. I use glue on the joints for a strong bond. Now I measure the leg on the right-side and cut it to length at a 45-degree angle. Sometimes I have to play with this cut making it a 46 or a 44 til I get it to fit just right. Because I had to pull the casing out at the top to make a tight joint, I slid a shim behind it before n

Chegaste aqui por um link? Lança tu também.

🎲 Lançar os Dados

Reproduzido pelo leitor oficial incorporado. Ver no YouTube.