How to Build a Chicken Coop | Build It | Ask This Old House
This Old House8:302016Bricolage
Ask This Old House general contractor Tom Silva creates a backyard chicken coop for a homeowner in Connecticut in Build It (See below for steps.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Steps for How to Build a Chicken Coop: 1. Stain the sheets of T1-11 and allow to dry. 2. Place two sheets of T1-11 on top of each other and ensure they are even on all sides. Use a track saw to cut the roofline of the plywood at a 45-degree angle on both sheets at once. 3. Remove one sheet and then, using a jigsaw, cut a small square opening for the sliding coop door into a plywood sheet. For all the doors, the cutouts will later be reattached as the door. 4. On the next sheet, cut an opening for the small entrance door, using the jigsaw. 5. Cut a third sheet of T1-11 to form the side walls. On one of them, cut a large opening for the egg door, using a jigsaw. The other side wall will remain uncut. 6. Cut two of the 4x4 posts to the desired length, then match the angle of
Chegaste aqui por um link? Lança tu também.
🎲 Lançar os DadosReproduzido pelo leitor oficial incorporado. Ver no YouTube.